Technical data

Discharge nozzle: 50 mm
Weight: 33 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 270 x 670 mm

Materials

Hydraulic box: gray cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 0.5 kW
Speed: 1417 rpm
Rated current: 1.6 A
Starting Method: Direct                                                                                                                                                                                                                                                                                                                                                                        Cable: 20 m
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: aut./man. 
• operation: temperature probe

Operating conditions

Medium: Sludge water
Max. pumping volume - see Q-H curve: 9.5 l/s
Max. pumping height - see    Q-H curve: 4.3 m

Technical data

Discharge nozzle: 65 mm
Weight: 50 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 285 x 510 mm

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant … steel GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 1.1 kW
Speed: 1449 rpm
Rated current: 4.0 A
Starting Method: direct 
Cable: 20 m
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 12.0 l/s
Max. pumping height - see Q-H curve: 17.0 m

Technical data

Discharge nozzle: 50 mm
Weight: 32 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 270 x 670 mm

Materials

Volute Casing: gray cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rate: 1.5 kW
Speed: 2730 rpm
Rated current: 4.4 A
Starting method: direct 
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation; themperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 14.5 l/s
Max. pumping height - see  Q-H curve: 13.0 m

Technical data

Discharge nozzle: 65 mm
Weight: 50 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 285 x 510 mm

Materials

Volute casing: gray cast iron GG20
Impeller: ductile iron GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 1.5 kW
Speed: 2922 rpm
Rated current: 4.8 A
Starting method: direct
Cable: 20 m
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 24.0 l/s
Max. pumping height - see Q-H curve: 8.5 m

Technical data

Discharge nozzle: 80 mm
Weight: 62 kg
Free Passage: 75 mm
Dimensions max W x H without discharge: 380 x 610 mm

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 1.5 kW
Speed: 1415 rpm
Rated current: 4.8 A
Starting method: direct 
Cable: 20 m
Starting method: direct
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 15.0 l/s
Max. pumping height - see  Q-H curve: 13.0 m

Technical data

Discharge connection: 80 mm
Weight: 40 kg
Passage: 50 mm
Dimensions max W x H without discharge: 330 x 690 mm

Materials

Volute casing: gray cast iron GG20
Impeller: ductile iron GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 1.6 kW
Speed 2865 rpm
Rated current: 3.9 A
Starting method: direct 
Cable: 20 m
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Poznámky

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation; temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 19.5 l/s
Max. pumping height - see  Q-H curve: 24.5 m

Techncal data

Discharge nozzle: 65 mm
Weight: 50 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 285 x 510 mm

Materials

Volute casing: gray cast iron GG20
Impeller: nodular cast iron GGG60
Shaft seal: mechanical seal SiC/SiC

Drive

Motor: electric motor
Nominal rating: 3.0 kW
Speed: 2790 rpm
Rated current: 7.8 A
Starting method: direct 
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 31.0 l/s
Max. pumping height - see  Q-H curve: 13.0 m

Technical data

Discharge nozzle: 80 mm
Weight: 62 kg
Free Passage: 75 mm
Dimensions max W x H without discharge: 460 x 580 mm

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 3.0 kW
Speed: 2790 rpm
Rated current: 7.8 A
Cable: 20 m
Starting method: direct
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface waterindustrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 31.0 l/s
Max. pumping height - see  Q-H curve: 19.0 m

Technical data

Discharge nozzle: 80 mm
Weight: 80 kg
Free Passage: 75 mm
Dimensions max W x H without discharge: 370 mm X 610 mm

Materials

Volute casing: grey cast iron GG20
Impeller: nodular cast iron GGG60
Shaft seal: mechanical seal SiC/SiC

Drive

Motor: electric motor
Nominal rating: 4.0 kW
Speed: 2800 rpm
Rated current: 11.7 A
Starting method: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• temperature probe
• possibility of controlling the leakage to the motor at the switchboard

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 38.0 l/s
Max. pumping height - see Q-H curve: 21.0 m

Technical data

Discharge nozzle: 80 mm
Weight: 88 kg
Free Passage: 75 mm
Dimensions max W x H without discharge: 390 x 890 mm

Materials

Volute casing: grey cast iron GG20
Impeller: nodular cast iron GGG60
Shaft seal: mechanical seal SiC/SiC

Drive

Motor: electric motor
Nominal power: 5.5 kW
Speed: 2860 rpm
Rated current: 13.2 A
Starting method: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• temperature probe
• possibility of controlling the leakage to the motor at the switchboard

Operating conditions

Medium: sludge water
Max. pumping volume - see. Q-H curve: 35.0 l/s
Max. pumping height - see H-H-H. Q-H curve: 38.0 m

Technical data

Discharge nozzle: 80 mm
Weight: 170 kg
Free Passage: 50 mm
Dimensions max W x H without discharge: 450 x 670 mm

Materials

Volute casing: grey cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: mechanical seal SiC/SiC

Drive

Motor: electric motor
Nominal rate: 6.5 kW
Speed: 3000 rpm
Rated current: 13.6 A
Starting method: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• temperature probe

Operating conditions

Medium: sludge water
Max. pumping volume - see  Q-H curve: 42.0 l/s
Max. pumping height - see  Q-H curve: 55.0 m

Technical data

Discharge nozzle: 80 mm
Weight: 172 kg
FreePassage: 50 mm
Dimensions max W x H without displacement: 385 x 1100 mm

Materials

Volute casing: grey cast iron GG20
Impeller: corrosion-resistant CrNiMo steel
Shaft seal: mechanical seal SiC/SiC

Drive

Motor: electric motor
Nominal rate: 13.0 kW
Speed: 2905 rpm
Rated current: 27.5 A
Starting method: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• temperature probe
• possibility of controlling the leakage to the motor at the switchboard

Operating condition

Medium: sludge water
Max. pumping volume - see Q-H curve: 160.0 l/s
Max. pumping height - see Q-H curve: 25.0 m

Technical data

Discharge nozzle: 125 mm
Weight: 750 kg
Free Passage: 115 mm
Dimensions max W x H without discharge: 2100 x 860 x 1120 mm

Materials

Volute casing: grey cast iron GG20
Impeller: ductile cast iron GGG60
Shaft seal: mechanical seal SiC/SiC

Pohon

Motor: electric motor
Nominal rating: 30.0 kW
Speed: 1460 rpm
Rated current: 65.0 A
Connection: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• the possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• thermal protection of the pump
• possibility of controlling the leakage to the motor at the switchboard

Operating conditions

Medium: Sludge water
Max. pumping volume - see Q-H curve:  290.0 l/s
Max. pumping height - see    Q-H curve:  24.0 m

Technical data

Discharge nozzle: 250 mm
Weight:  590 kg
Free passage: 120 mm
Dimensions max W x H without discharge:  820 x 1850 mm

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant … steel GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating:  37.0 kW
Speed: 1460 rpm
Rated current: 86.0 A
Starting method: Y/Δ
Cable: 20 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Content:

Operating conditions

Medium: Sludge water
Max. pumping volume - see Q-H curve:440.0 l/s
Max. pumping height - see    Q-H curve:  22.0 m

Technical data

Discharge nozzle:300 mm
Weight: 1500 kg
Free Passage: 150 mm
Dimensions max W x H without discharge:1515 x 2350 mm
 

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant … steel GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 45.0 kW
Speed: 977 rpm
Rated current: 91.0 A
Starting method: VFD                                                                                                                                                                   Cable: 50 m
Voltage: 400 V/50 Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe

Operating conditions

Medium: Sludge water
Max. pumping volume - see Q-H curve: 850.0 l/s
Max. pumping height - see    Q-H curve: 34.0 m

Technical data

Discharge nozzle: 400 mm
Weight: 4000 kg
Free Passage: 180 mm
Dimensions max W x H without discharge: 3500 x 1400 x 1500 mm

Materials

Volute casing: gray cast iron GG20
Impeller: corrosion-resistant … steel GGG60
Shaft seal: SiC/SiC mechanical seal

Drive

Motor: electric motor
Nominal rating: 110.0 kW
Speed: 970 rpm
Rated current: 262.0 A
Starting method: VFD
Cable: 20 m
Voltage: 400 V/50Hz

Main use

• various types of sludge, oil/water mixtures and mud
• pumping in wastewater treatment plants and during the reconstruction of sewers
• raw sewage and polluted surface water
• industrial wastewater

Properties

• screw centrifugal impeller with increased clogging resistance
• can be used horizontally or vertically
• high throughput of the impeller

Comment

• possibility of controlling the water level using a float
• possibility of control using a motor starter: AUT/MAN
• operation: temperature probe